News
8-23-2010
Anderson Pump & Process's Illinois Branch is moving to a large facility!
****************IMPORTANT NOTICE****************
Effective 8-27-2010
The new address will be:
Anderson Pump & Process
1157 N. Main St.
Lombard, IL 60148
630-782-6834 Office
630-782-6835 Fax
Our phone numbers and remit to address are NOT changing.
*******************************************************
In an effort to continually provide our customers with the highest level of service, customer satisfaction, and inventory availability, our Elmhurst, IL office will be moving to Lombard, IL on Friday, August 27th. Please update all of your records.
4-22-2010
PSG introduces a new Movex Self Priming Pump
Blackmer's eccentric disc pump - Mouvex Technology, is used in an array of applications across the globe. It has many unique features giving it many advantages over competing pump lines. There are no mechanical seals thus eliminating leaks and reducing maintenance time. The eccentric disc pumps are direct coupled to the gear reduction unit or motor therefore eliminating the need for magnets. With its clean-in-place capability, flushing and cleaning take place without disassembly. With the recommendation of the EHEDG(European Hygenic Equipment Design Group) and a 3A approval certification the stainless steel models are ideal for sanitary applications.
The unique eccentric disc concept provides gentle handling and high-volume efficiency. The following applications use the Mouvex technology eccentric disc design:
- Chemicals
- Food
- Pharmaceuticals
- Cosmetics
- Agrochemicals
- Petrochemicals
The eccentric disc pumps – Mouvex technology are capable of handling fluids of kinetic viscosity of
3000 cst (14,000 ssu) inside the pump and working pressures of 5-9 Bar (72.5-130psi). Flow rates range from 0.11 m3h (0.5 GPM) to 36 m3h (160 GPM).
Its construction consists of either stainless steel or ductile iron and is rated to 100 up to 150°C (212 up to 302 °F). This technology provides extraordinary self priming and may run dry for a short period of time. Additionally, eccentric disc pumps are very low shear for shear sensitive liquids such as sauces, silicon emulsions, cosmetics, food, etc. Performance tests show shear rates lower than circumferential piston pumps, lobe and gear pumps. The patented design provides unique parts and operating characteristics.
For further information about the C-series, S-Series or A-Series pumps <Click Here>
4-8-2010
Anderson Pump & Process proudly announces our new partnership with PeopleFlo Manufacturing
Why are zero-leakage chemical process pumps, that lower operating costs and 
eliminateenvironmental costs, so complicated, so expensive, and therefore so uncommon?
Inspired by these questions, PeopleFlo Manufacturing was founded in 2004 in Chicago to design and manufacture EnviroGear®, a zero-leak pump for customers in the chemical, petrochemical and food processing markets. EnviroGear is uniquely designed to enable customers to reduce operating costs and eliminate environmental costs for a more affordable up-front investment.
Please click here for their brochure: PeopleFlo Brochure
1-19-10
Anderson Pump & Process Receives Prestigious Award from Sharpe Mixers!
Anderson Pump & Process has been selected to receive the "Outstanding Sales Representative" award for 2009 from Sharp Mixers.
This award is given annually to a select few distributors for achieving outstanding sales growth and market penetration.
Anderson's continual commitment to the Sharpe Mixer product line produced one of the highest sales totals for all of North America.
Congratulations on a job well done!
11-30-09
Liquiflo Regional Distributorship Awarded to Anderson Pump & Process
Anderson Pump & Process is proud to announce that we have been awarded the regions of Illinois and Northwestern Indiana as an authorized distributor for Liquiflo products. Please give us a call for all of your Liquiflo needs at 262-784-3340 for our main office in Wisconsin or 630-782-6834 for our Illinois branch. We have been a Liquiflo distributor for all of Wisconsin and Upper Michigan for over 10 years and carry a full line of their products. Please click on the logo to go to their website.
9-21-09
Circle of Safety Platinum Award Winners
- Anderson Pump & Process
Parker Industrial Hose Division (Parker IHP) would like to congratulate the following distributor for achieving Platinum Circle of Safety status for the upcoming year. Platinum recognition is awarded to Circle of Safety distributors with substantial achievements during the past year in a combination of areas including sales growth, electronic order entry, and payment in comparison to terms, among other possible criteria.
- Anderson Pump – Brookfield, WI
The Circle of Safety Program exists to enhance the relationship between Parker IHP and its most committed distributors. Through this program the Circle of Safety distributor and Parker IHP combine efforts to successfully grow together using new product development, new market development, and a safety conscious mentality in dealing with end use customers
Platinum recognition provides additional benefits beyond the standard incentives of the Circle of Safety program including a rewards outing to celebrate the success of the past year. To find out more information regarding the Circle of Safety program please contact your local Industrial Hose Specialist.
6-16-2009
Grand Rapids, MI –
In an effort to visually demonstrate how positive-displacement pumps
that feature sliding-vane technology are able to capably handle
liquids of varying viscosities, Blackmer has created a “Viscosity
Video” for distributor use. The premise of the video is that while
Blackmer’s patented sliding-vane technology is well-regarded for its
ability to effectively move low-viscosity, thin fluids, the
versatile design of sliding-vane pumps also make them ideal for
moving liquids with viscosities in the range of 50,000 SSU and
higher.
At the conclusion, the
video shows that the superior mechanical performance of Blackmer
sliding-vane technology results in exceptional mechanical
performance and 24% greater energy efficiency when compared to gear
pumps. Vane technology also performs very effectively in moving
high-viscosity liquids at both high and low speeds. In addition, the
sliding-vane design delivers superior suction lift and
line-stripping capabilities while eliminating the energy-robbing
slip and capacity loss that are associated with gear and lobe pumps.
5-27-2009 A
key component of any manufacturing operation is its pumping systems,
and while they are a necessary part of the supply chain, they are
often the cause of increased energy costs due to poor design and
improper operation. With that in mind, Blackmer® has created its Smart Energy
Program to emphasize the ability of its positive-displacement
sliding-vane pumps to improve the energy efficiency of plants where
pump systems are in operation. To illustrate this point, Blackmer
has provided the following white paper that explains how the United
States Energy Policy Act of 2005 has had a direct effect on pump
users and manufacturers. The
white paper recently appeared in the February 2009 issue of
World Pumps
magazine. To read the published version of the white paper,
CLICK HERE. For
more information on Blackmer’s Smart Energy Program and its related
pump technologies, please visit us at
www.blackmer.com. 2-26-2009
1-09-2009 12-31-2008 9-17-2008 To go directly to the pictures of the event click here: 9-15-2008 8-22-2008 Download our monthly Clearance Item Flyer here: 6-3-2008 4-7-2008
Read the full article here: Spectrum introduces new internal gear
pump (Click Here) 1-1-2008
12-26-2007 12-17-2007 If you have any questions or suggestions, please contact us at Updated 8/23/2010
BLACKMER SLIDING-VANE
“VISCOSITY VIDEO” NOW AVAILABLE
The video spells this out in three distinct sections:
• A review of basic vane-technology principles with a comparison to
the less effective principles found in gear pumps
• A visual overview of the various viscosity ranges that Blackmer
sliding-vane pumps can handle, from low-viscosity, thin liquids (30
SSU) such as LPG and light fuel oils to high-viscosity liquids
(45,000 SSU, or greater) such as heavy motor oil
• A visual demonstration of the effectiveness of vane technology in
pumping high-viscosity liquids
Check out the video here:
http://www.youtube.com/watch?v=spBguHbCvJ0
Provisions in Energy Policy Act of 2005 Create Opportunities For
Pump Manufactures to Help Increase Energy Efficiency
When considering the day-to-day operations of the nation’s
manufacturing sector, it appears the goals of management are at
cross-purposes with the realities of the world at large. Namely,
energy and utility costs continue to rise, while management demands
that greater cost controls be put into place in an attempt to ensure
profitability. An added element to the story is the pressure being
exerted by outside forces for operations that satisfy new
environmentally friendly (and often costly) “green” initiatives.
<Pump Manufactures Help Increase Energy Efficiency>
Precision Laser Shaft Alignment Services Now Offered to Our
Customers
Precision alignment is a process that ensures that machinery is
installed in a precise manner to maximize its operational life. It
should be performed on every installation of rotating
equipment, no matter how small, no matter how critical.
Precision alignment will lead to reduced maintenance and operational
costs, and increased product quality. There are a number of ways
that this process will save money.
<CLICK HERE TO READ MORE >
Anderson Pump & Process is proud to announce that we will be
making vast changes to our website including: adding new pictures,
updated and cutting edge content, supplier and in house videos
of our products and services, and many other enhancements that will
make our site more user friendly, beneficial, and informative.
Check out this video example of a Wilden VC 3A certified sanitary
solid food pump in action:
http://www.youtube.com/watch?v=12C7_eEpNHk
Congratulations to Margaret Brabeck for receiving the 2nd annual
JSK Award of excellence for her continual service to Anderson Pump &
Process. Working out of our Elmhurst, IL office, Margaret has
continually went above and beyond to help her co-workers and
supervisors. A very special thank you goes out to you Margaret!
We celebrated our 50th anniversary on the 17th of September,
2008.
Anderson Pump & Process, an A. A. Anderson & Co., INC company, has
been in business since 1958, and in celebration of this milestone we
opened our doors for an open house complete with a live band. To see
more information and pictures from this event please click below.
2008 - 50th Anniversary Open House
2008 - 50th Anniversary Open House Picture Page
Wilden has
released TB 1542 INTRODUCTION OF THE 25mm (1”) AND 38mm (1-1/2”)
NEOPRENE BACKED QUADRA-FLEX™ PTFE LAMINATE DIAPHRAGM
Wilden is proud to announce the availability of neoprene backed
Quadra-Flex™ laminate diaphragms for 25 mm (1”) and 38 mm (1-1/2”)
pumps. Quadra-Flex™ diaphragms incorporate a proprietary composite
polytetrafluoroethylene (PTFE) layer bonded to fabric reinforced
neoprene. These diaphragms are available for use in both Advanced™
bolted and Original™ clamped Wilden pumps. The Quadra-Flex™
diaphragm was developed through proprietary manufacturing
techniques, an intensive study of diaphragm dynamics, and Finite
Element Analysis (FEA). Quadra-Flex™ diaphragms provide superior
flex life and unparalleled tear resistance when compared to
competitor diaphragms on the market.
To read more
- Click here
Printable Flyer - Click here
Full
Press Release - Click here
We are happy to announce our new inventory clearance page, and
PDF addition to our website. We have tons of discounted products
from various suppliers. This includes pumps, pump systems, pump
parts, hose, hose assemblies, fittings, and clamps all at
discounted, below list prices. Check out our new page for all the
great specials. Make sure you call in and mention that you saw it on
our website to get the special web only pricing.
Click here to access
the Clearance Items Page
Clearance Item Flyer
Parker Industrial Hose Products increased its product offerings
to Anderson Pump & Process through the acquisition of Titan
Industries, a manufacturer of industrial rubber, custom made and composite hoses
for fluid and material transfer as well as related products,
services, and accessories. This acquisition gives Anderson Pump &
Process a more competitive edge in the marketplace by providing us a
larger and more in-depth product line to better service our
customers.
Read the full article here:
Parker acquires Titan Industries - Full Article (Click here)
Spectrom, a Wilden owned company, is proud to announce the release
of Spectrom TM
Universal Internal Gear pumps. Spectrom’s heavy duty cast iron gear
pumps are completely retrofittable to Viking’s Universal 124A and
4124A gear pumps. Spectrom’s heavy-duty cast iron gear pumps are
designed for the toughest industrial applications. The gear pumps
are offered with a variety of connections from 38 mm (1-1/2”)
through 76 mm (3”). The gear pump internal components are available
with multiple material options for the idlers, bushings, and seals.
Jeff Green was the recipient of the 1st annual JSK Award at
our annual Christmas party. This employee of the year award
was renamed to the JSK Award in honor of our
recently retired Vice President, Joan Kirschenmann, for over 47
years of service. Our congratulations go out to Jeff on his
continual dedication to the company and contributions to the growth
of the hose division over the last few years. Jeff has been with the
company since early 2006, and has been an integral member of our
operations.
We have been the authorized FulFlo distributor in Wisconsin for over 10 years and through our continued growth we were recently named the authorized
distributor in Northwestern Indiana and Illinois. Please contact us for all of your FulFlo needs.
We are proud to unveil our new website. A clearer structure and simplified
navigation makes information easily accessible.
administrator@aaaco.com.
